STABLE MULTIFUNCTIONAL EMULSIONABLE CUTTING FLUID

PROPERTIES:

It forms an opalescent micro-emulsion that provides good cooling in the cutting area, extending the life
of the tools.

Its good anticorrosive power protects the moving parts of machine tools. High stability with water up to
100 HF of hardness and 700 ppm of chlorides.

Good anticorrosive power from concentrations of 3%, being nitrite-free, giving excellent protection to
machines and machined parts.

RALCOCUT SMT emulsions, due to their stable character, their low concentration of use, their long life,
conservation of tools and savings in bactericides and maintenance, a great economy is obtained
compared to emulsions of conventional products.

HOW TO USE:

To prepare emulsions, it is necessary to use water with a hardness between 20 and 100 degrees HF
and that the chloride content does not exceed 700 ppm.

To get a good emulsion, it is advisable to pour the product over the water and then shake. DO NOT
pour water on the RALCOCUT SMT.

The dose of use is from 3 to 8%, depending on the type of operation and material used, so it will be
recommended in each case by our Technical Service, the following being indicative:

Soft water (20 degrees HF), low chloride content (100 ppm)                                      3%-5%
Hard water (up to 75 degrees HF), high chloride content (up to 700 ppm)              5%-8%
Hard water (75 to 100 degrees HF), high chloride content (up to 700 ppm)            8%-12%